trixbox

From the "maint" web interface, select "PBX settings" from the PBX menu.

First add a SIP Trunk to your trixbox by clicking on "Trunks" (located on the left side bar) and choosing "Add SIP Trunk":

Quantumvoice recommended SIP trunk settings:

Outbound Caller ID: [10 digit QV number]
Trunk Name: [Trunk Name]

PEER Details:
     host=ob.quantumvoice.com
     fromdomain=sipdr.quantumvoice-sip.com
     fromuser=[10 digit QV number]
     insecure=very
     username=[10 digit QV number]
     secret=[QV SIP password]
     type=peer
     context=from-trunk

Register String:
[10 digit QV number]:[QV SIP password]@[Trunk Name]/[10 digit QV number]


For Example:

Outbound Caller ID: 7345551212
Trunk Name: QVtrunk01

PEER Details:
     host=ob.quantumvoice.com
     fromdomain=sipdr.quantumvoice-sip.com
     fromuser=7345551212
     insecure=very
     username=7345551212
     secret=9wremBol3
     type=peer
     context=from-trunk

Register String:
7345551212:9wremBol3@QVtrunk01/7345551212

Next, add an "Incoming Route" by clicking on "Inbound Call Control" (located on the left side bar) and selecting "Inbound Routes" :

Quantumvoice recommended Incoming Route settings:

Description: [Optional]
DID Number: [10 digit QV number]
...
Set Destination
(choose desired call treatment for your Quantumvoice number)

For Example:

Description: Send calls for 7345551212 to extension 101
DID Number: 7345551212
...
Set Destination
(o) Extensions : <101> Sample Extension 101

Finally, configure an outbound route to use Quantumvoice by clicking on "Outbound Routes" (located on the left side bar) and selecting "Add Route" or clicking on an existing route from the resulting page:

Quantumvoice recommended Outbound Routes setting:

Route Name: [Arbitrary]
...
Dial Pattern: [Used to match Route]
Dial patterns wizards: [Can be used to configure "Dial Pattern"]
...
Trunk Sequence: [QV Trunk Name]

For Example:

Route Name: 9_outside
...
Dial Pattern: 9|.
...
Trunk Sequence:      0 SIP/QVtrunk01